SyncPro Manometer Fluid Refill InstructionsJun 3, 2014
Thank you for purchasing Motion Pro SyncPROTM Replacement Fluid. In the event excess vacuum was placed on the SyncPROTM, fluid from all four chambers may be drained from the reservoir. (NOTE: If you experience fluid loss from only one chamber, please contact Motion Pro to determine if there is a problem with your SyncPROTM before refilling it.) The following steps will guide you through the procedure for replacing fluid that was lost during calibration or synchronization.
Have the following items handy before you begin: #1 Phillips screwdriver, a small flat blade screwdriver, running water, paper towels and compressed air.
Instructions All Article Tags