T-6 Combo Lever 27mm- Perfectly contoured tire spoon on one end
- Hex box wrench for 27 mm axle nuts on other end
- Lightweight forged 7075 T-6 aluminum
- Hard anodized finish
- Under 10 inches in length and weigh only 3.5 oz.
- Hex end is rated for a maximum torque of 90 ft-lbs
|
Part # 08-0288
$39.99
Add to Wishlist
International
Dealer Checkout
Coming Soon...
|
|
08-0183
Valve Core Remover
|
|
08-0471
Bead Buddy II
|
|
08-0546
RimShield II
|
|
11-0009
Wheel Rim Lock, 1.60/1.40
|
|
11-0010
Wheel Rim Lock, 1.85
|
|
11-0011
Wheel Rim Lock, 2.15
|
|
11-0017
Wheel Rim Lock, 2.50
|
|
11-0022
LiteLoc Rim Lock Nuts with Beveled Washers, 12mm (Pair)
|
|
11-0061
Motion Pro Armor Rim Strip Tape for 21 Inch Wheels
|
|
08-0455
Wheel Weights, Steel, Black, 18oz Pack, 72-1/4oz Segments
|
|
08-0454
Wheel Weights, Steel, Silver, 18oz Pack, 72-1/4oz Segments
|
|
08-0453
Wheel Weights, Steel, Black, 90oz Box, 360-1/4oz Segments
|
|
08-0258
Motion Pro Professional Tire Pressure Gauge 2.5" 0-30 Psi
|
|
08-0259
Motion Pro Professional Tire Pressure Gauge 2.5" 0-15 Psi
|
|
08-0327
T-6 Combo Lever Adapter 27mm to 3/8 In Drive
|
|
08-0357
Rim Protectors
|
|
08-0388
T-6 Trail Bead Buddy
|
|
08-0402
Motion Pro Professional Tire Pressure Gauge 2.5" 0-60 Psi
|
|
08-0439
Motion Pro Bead Popper
|
|
08-0452
Wheel Weights, Steel, Silver, 90oz Box, 360-1/4oz Segments
|
|
11-0062
Motion Pro Armor Rim Strip Tape for 18 to 19 Inch Wheels
|
Average Customer Rating
Awesome
This really is great, it's lighter than a pair of regular tire irons while doubling as an axle removal wrench and the spoon end makes for an easier tire install. for removal the 12\13mm version has a smaller end with a lip to catch the bead.
A single unit in your size plus the 12\13mm replace the following.
27mm (or whatever you use) socket or wrench
half inch ratchet to drive the above socket
tire irons
12mm box end wrench
13mm box end wrench
Don't forget to add a bead buddy (or two) to your shopping cart.
If I can make a simple suggestion. Put 2 holes towards the tire lever end so that you can connect two of these together for more leverage for stubborn axles. Mine have already been modified and it makes a world of difference.
