Motion Pro - ForkTru - Fork Alignment Tool

Events
Calendar

ForkTru - Fork Alignment Tool

Quick and easy to use tool for aligning front forks to insure they are parallel from top to bottom
Knurled adjustment screws for easy setup
Reduces stiction and improves the performance of your front suspension
Reduces seal and bushing wear
Fits most MX and Off-Road motorcycles (does not work on most sport bikes due to large brake rotor diameter and 17 inch wheel diameter)
Will work on 27 mm - 62 mm fork legs and tubes
Works on forks that are 140 mm to 220 mm on center
U.S. Patent No. 7,690,128

Part # 08-0412

$30.99

Add to Wishlist

Read the FORKTRU Fork Alignment Tool Instructions.

Also, visit our tech section for more instructions, reference guides, etc. on other products.

Customer Reviews

Average Customer Rating

Write a Review

based on 2 ratings

Customer Reviews

Comment

Reviewed by .
2008-09-11 02:35:56

Reviewed by Andy from San Anselmo
2008-02-14 03:08:36

Pilot

I usually set the fork legs by bouncing the forks up and down with the pinch bolts loose. I checked my old setting with the forktru and found it was off by more than a 2 mm. Haven't riddent yet so I don't know how much effect it will have, but it sure can't hurt and will probably make the seals last longer.