Support » Cables » Question
2002 Blaster with Mikuni VM26-606 Carb
I need a cable to fit a thumb throttle to a Mikuni VM26-606 Carb without tors
1
I have this question too
The best answers
Morgan S
replied four months ago
Hello,
If you have the stock thumb throttle and already replaced the stock carb cap and installed the idle screw into the side of the car, you just need the cable and can use 01-0874 $16.77.
If you don’t have the idle on the side of the carb, you also needs 08-0045 $24.99.
If you also need the carb cap, we have a TORS Eliminator kit for your machine 01-0390 $23.52, that includes the cable 01-0874, the carb cap, and the carb cap adjuster.
This kit doesn’t include the idle kit 08-0045. SPECIAL NOTE! PLEASE READ: Warning: Installation of this kit(08-0045) requires drilling and tapping the carburetor body.
Installation of this kit requires a high degree of skill and should only be done by an experienced mechanic with proper equipment (a drill press or mill is recommended).
Improper installation will damage your carburetor. Motion Pro is not responsible for damage to carburetor resulting from misuse or improper installation.
If you have any other further questions please call our Custom Cable department at 650-594-9600
If you have the stock thumb throttle and already replaced the stock carb cap and installed the idle screw into the side of the car, you just need the cable and can use 01-0874 $16.77.
If you don’t have the idle on the side of the carb, you also needs 08-0045 $24.99.
If you also need the carb cap, we have a TORS Eliminator kit for your machine 01-0390 $23.52, that includes the cable 01-0874, the carb cap, and the carb cap adjuster.
This kit doesn’t include the idle kit 08-0045. SPECIAL NOTE! PLEASE READ: Warning: Installation of this kit(08-0045) requires drilling and tapping the carburetor body.
Installation of this kit requires a high degree of skill and should only be done by an experienced mechanic with proper equipment (a drill press or mill is recommended).
Improper installation will damage your carburetor. Motion Pro is not responsible for damage to carburetor resulting from misuse or improper installation.
If you have any other further questions please call our Custom Cable department at 650-594-9600