Support » Controls » Question
2011 Raptor 125 twist throttle conversion
Have you looked at the 2011 Raptor 125 for a twist throttle conversion kit yet. Looks like the kit for the Raptor 250 should work - I checked the Yamaha part diagrams and both seem to use the same carb with different jetting - the cable length may be different....please check for me ASAP!!! I will buy one for sure. Thumb cramps are spoiling the ride!!! Thanks Much!!!
1
I have this question too
This question has been answered.
Hello Quinn,
The 2011 Raptor 125 is a new model. At this time, we do not have a throttle kit available for this ATV. If you would like to assist us in developing a kit for the 125, you could send in the stock thumb throttle and throttle cable assembly from your vehicle so that we can develop a kit for the Raptor 125.
In return, we’ll give you a twist throttle kit no charge and return your samples in original condition.
Although it is rare, its possible we may not have the correct fittings to build a twist throttle cable. If so, we will just return your stock components to you. This is uncommon and we don't expect that to be the case in your situation. Unfortunately we won’t know if we can build the twist throttle kit until we personally look at the thumb throttle and cable.
If you would like to assist us with this project, please contact Larry Snyder in our R&D department at 650-594-9600, etx. 111. He can explain the details and give you information about shipping your stock items to us.
Thank you for your inquiry~
The 2011 Raptor 125 is a new model. At this time, we do not have a throttle kit available for this ATV. If you would like to assist us in developing a kit for the 125, you could send in the stock thumb throttle and throttle cable assembly from your vehicle so that we can develop a kit for the Raptor 125.
In return, we’ll give you a twist throttle kit no charge and return your samples in original condition.
Although it is rare, its possible we may not have the correct fittings to build a twist throttle cable. If so, we will just return your stock components to you. This is uncommon and we don't expect that to be the case in your situation. Unfortunately we won’t know if we can build the twist throttle kit until we personally look at the thumb throttle and cable.
If you would like to assist us with this project, please contact Larry Snyder in our R&D department at 650-594-9600, etx. 111. He can explain the details and give you information about shipping your stock items to us.
Thank you for your inquiry~
