Support » Tools » Question
EK chain
Hi, I've got tool 08-0058 and try to rivet an EK chain- the problem is that the rivet itself is full of material, no hole at extremity to be crimped. Should I used another tool ? how to do ?\nTks
1
I have this question too
The best answers
Chris V
replied three years ago
Hello FX,
The EK chain you have is a solid nose rivet, vs. the more common hollow nose rivet, which the 08-0058 can be used with. We have a Jumbo Chain Tool, when used with the accessory Quad Stake Riveter, will be able to rivet the solid nose EK master link. Links here:
http://www.motionpro.com/motorcycle/partno/08-0135
http://www.motionpro.com/motorcycle/partno/08-0142/
The EK chain you have is a solid nose rivet, vs. the more common hollow nose rivet, which the 08-0058 can be used with. We have a Jumbo Chain Tool, when used with the accessory Quad Stake Riveter, will be able to rivet the solid nose EK master link. Links here:
http://www.motionpro.com/motorcycle/partno/08-0135
http://www.motionpro.com/motorcycle/partno/08-0142/