Support » Tools » Question
Fork seal driver
I bought your 46-47 mm seal driver for my '01 426. Can I use this tool to seat the slide bushing as well or do I need a different tool?
1
I have this question too
This question has been answered.
Hello Jim-
Your fork tube bushings are split. Just slide them over or into the fork leg by hand. There are no tools needed for that part of your fork service.
Thank you for your inquiry~
Your fork tube bushings are split. Just slide them over or into the fork leg by hand. There are no tools needed for that part of your fork service.
Thank you for your inquiry~
Comment on MP User's reply
Thanks Casey but I was speaking of the bushing that goes into the outer fork leg. What I did was use the thick washer between the bushing and the fork seal driver. Worked like a charm. I can't believe how many forks I have done without a driver. No more!
Thanks,
Jim
Thanks,
Jim