Support » Controls » Question
Headlights not working
I am installing a motion pro kill switch on a 2005 Honda cbr600rr and after wiring the new switch my headlights will not turn on.Starter and everything else works so do you have a diagram of any kind showing what wires from the new switch go to the factory harness?
1
I have this question too
The best answers
Morgan S
replied 17 months ago
Part #11-0057 is not a “plug and play” item and must be hard wired using the 2005 CBR600RR wiring diagram for reference during installation. In some cases the headlight may be disabled due to some OEM functions that 11-0057 does not feature.Below is additional information we’ve posted for 2005 CBR600RR you may find useful:
“This Revolver VR Throttle does not have the starter and kill switch wiring or switches that are built into your stock throttle assembly. Use of the Revolver VR Throttle requires an aftermarket kill switch and starter button assembly (pn 11-0057, not included in kit). Revolver Kits have cables specifically designed for fitment on specific models, but the Revolver throttle itself is not model specific. Therefore, in some situations, the Revolver kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Revolver throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Revolver kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death.”
“This Revolver VR Throttle does not have the starter and kill switch wiring or switches that are built into your stock throttle assembly. Use of the Revolver VR Throttle requires an aftermarket kill switch and starter button assembly (pn 11-0057, not included in kit). Revolver Kits have cables specifically designed for fitment on specific models, but the Revolver throttle itself is not model specific. Therefore, in some situations, the Revolver kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Revolver throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Revolver kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death.”