Support » Controls » Problem
Hello, I have a Honda CL350. I want to get a quick dual disconnect for the fuel line. should i get a 1/4 or 5/16? Thanks
fuel line quick disconnect
1
I have this problem too
This problem has been solved.
Hello Mike-
It's usually best if you measure the ID of the fuel line yourself with a micrometer because there's no guarantee that the fuel line you're running is what came stock on that bike. Odds are very high that it's not the OEM fuel line. Once you take that measurement you'd know for sure which quick disconnect to use.
On the other hand, IF you are using the OEM fuel line then we actually don't have anything that would work for you. The original fuel line used on that model had an inside diameter of 7/32", or 5.5mm. The smallest quick disconnect we offer is 1/4", with an OD of 7.3mm, which would be extremely difficult if not physically impossible to install on your OEM fuel line.
I'm sorry that we don't have an exact answer for you. I strongly suggest measuring your fuel line as described above to ensure proper fitment.
Thank you for your inquiry~
It's usually best if you measure the ID of the fuel line yourself with a micrometer because there's no guarantee that the fuel line you're running is what came stock on that bike. Odds are very high that it's not the OEM fuel line. Once you take that measurement you'd know for sure which quick disconnect to use.
On the other hand, IF you are using the OEM fuel line then we actually don't have anything that would work for you. The original fuel line used on that model had an inside diameter of 7/32", or 5.5mm. The smallest quick disconnect we offer is 1/4", with an OD of 7.3mm, which would be extremely difficult if not physically impossible to install on your OEM fuel line.
I'm sorry that we don't have an exact answer for you. I strongly suggest measuring your fuel line as described above to ensure proper fitment.
Thank you for your inquiry~
