Support » Cables » Question
I have a carb. from PSI big air and they require a retro fit for the internal carb throttle and return cable ends. They supply a very small cylinder with a set screw to make a new end on the carb. side. Are these ends a good fix ,should I carry spares, is there something better ?
retro fit ends for the internal carb ends on the PSI Big Air carbs. Are they ok, is there something better, should I carry spares.
1
I have this question too
The best answers
Preston L
replied three years ago
Hello Larry,
Unfortunately we do not have any information on this carb, due to not having information we will not be able to give you any kind of recommendations unless we had one of the carbs on hand here.
Sorry we are not able to help you at this time. Thanks for thinking of us if you have any future questions feel free to contact us.
Thanks,
Preston.
Unfortunately we do not have any information on this carb, due to not having information we will not be able to give you any kind of recommendations unless we had one of the carbs on hand here.
Sorry we are not able to help you at this time. Thanks for thinking of us if you have any future questions feel free to contact us.
Thanks,
Preston.