Support » Tools » Problem
I have an FJR 1300 that I am trying to sync the throttle bodies. When I connected the sync gauge and started the bike the #1 and #4 seemed to suck all the mercury up and out the tool and into the throttle bodies. Can you tell me what I am doing wrong? john
Sync tool usage
1
I have this problem too
The best solutions
Chris V
replied three years ago
Hello John,
From what you have written, it seems like the tool was not calibrated properly, or you calibrated it to the wrong throttle body. We would need to have more information to really know what is happening. I would encourage you to give us a call at 650-594-9600, and someone would be happy to go over this in detail and help you solve your problem.
From what you have written, it seems like the tool was not calibrated properly, or you calibrated it to the wrong throttle body. We would need to have more information to really know what is happening. I would encourage you to give us a call at 650-594-9600, and someone would be happy to go over this in detail and help you solve your problem.