Support » Tools » Question
I need to remove some wheel bearings, and have never done this before, so was totally clueless about the tool and procedure (thanks for the illustrated instructions on the website!!). I need to buy a puller, and am guessing the collet size is related to the i.d. of the bearing...which I measured as best I could with a tape measure, and came up with 15.875mm. So, Guessing again, I think I would need the 15 mm collet? Am I guessing correctly???
Bearing Puller Tool
1
I have this question too
The best answers
Chris V
replied 20 months ago
Hello Karen,
To do this kind of work, it is really important to make very exact measurements of the inside diameter of the bearing you wish to remove. It is likely the bearing you are looking at is a 16mm bearing. Using the correct size puller is very important, as an incorrect size may not do the job properly, or you could damage the wheel or bearing, or injure yourself. If you have any doubts, I would strongly recommend you contact a professional technician for assistance.
To do this kind of work, it is really important to make very exact measurements of the inside diameter of the bearing you wish to remove. It is likely the bearing you are looking at is a 16mm bearing. Using the correct size puller is very important, as an incorrect size may not do the job properly, or you could damage the wheel or bearing, or injure yourself. If you have any doubts, I would strongly recommend you contact a professional technician for assistance.
This question has been answered.
Hello,
To better help answer your question can we get the year, make and model of the motorcyle?
Thank you.
To better help answer your question can we get the year, make and model of the motorcyle?
Thank you.
