Support » Controls » Question
Motion Pro Revolver
purchased a Motion Pro "Revolver" kit for my Honda CRF450R (2002) online. Unfortunately the supplier seems to have supplied the wrong size tube and grips (as they are too large). My handlebar is 7/8 Renthal (p/n: 773-01-RD Red MX / Enduro Handlebar). Could you please confirm which replacement tube and grips would be suitable for my handlbar? Trust I will be able to use the same housing and cables?
1
I have this question too
The best answers
Chris V
replied three years ago
Hello David,
You don't tell us which part number kit you have, which would be very helpful to make sure that you have the right kit in the first place. But, with all off road and MX Revolver throttle kits you would have gotten a closed end throttle tube, and a pair of half waffle dirt bike grips. The Revolver throttle is only sized for 7/8" handlebars, there is no alternate size. If you have a further concern, I would recommend you call us at 650-594-9600 and someone can help you directly.
You don't tell us which part number kit you have, which would be very helpful to make sure that you have the right kit in the first place. But, with all off road and MX Revolver throttle kits you would have gotten a closed end throttle tube, and a pair of half waffle dirt bike grips. The Revolver throttle is only sized for 7/8" handlebars, there is no alternate size. If you have a further concern, I would recommend you call us at 650-594-9600 and someone can help you directly.