Support » Cables » Problem
My clutch cable is really hard to pull.
1
I have this problem too
The best solutions
Staff
replied three years ago
There are a couple of reasons why you might have a really hard pull on the clutch cable. If the cable is brand new, you may have gotten a cable that had one of the fittings crimped to the housing too tightly, causing the drag you have experienced. This is rare, but I have seen it happen a couple of times. Normally our cables should pull at least as well as an OE cable, and usually much better than stock. If a fitting is too tight, the cable would be covered for replacement under our warranty program. If the cable is not brand new, and has been in use for some time, it could be caused by wear or a lack of lubrication. All cables need to be lubricated when they are first installed, and periodically during their lifetime.