Support » Cables » Question
Proper Clutch Cable for my Hybrid?
Proper Clutch Cable for my Hybrid?\n\nI have an 03 400ex with an 06 crf40r motor in it and need a clutch cable. I am trying to figure out which one. It has a +1 stem with atv-hi bars. Anybody know which one I need?
1
I have this question too
The best answers
Preston L
replied three years ago
Hello Richard,
This will have to be a custom built cable, we do make stock OEM replacement cables for both of these machines so we have the housing and wire end fitting information but what we don know is how the free length is going to be split up between the TRX 400EX lever assembly and the CRF 450R motor. i will need the stock TRX 400EX clutch control assembly and the stock CRF 450R clutch control assembly to figure out the proper free length if you are going to be using the stock TRX 400EX control.
One suggestion to make things easier is you can us the stock CRF 450R control then we can use the CRF 450R cable and just change the length of the housing if needed.
Hope this information is helps, when you are ready to place your custom cable order or if you have any further questions please give us a call at 650-594-9600.
Thanks,
Preston.
This will have to be a custom built cable, we do make stock OEM replacement cables for both of these machines so we have the housing and wire end fitting information but what we don know is how the free length is going to be split up between the TRX 400EX lever assembly and the CRF 450R motor. i will need the stock TRX 400EX clutch control assembly and the stock CRF 450R clutch control assembly to figure out the proper free length if you are going to be using the stock TRX 400EX control.
One suggestion to make things easier is you can us the stock CRF 450R control then we can use the CRF 450R cable and just change the length of the housing if needed.
Hope this information is helps, when you are ready to place your custom cable order or if you have any further questions please give us a call at 650-594-9600.
Thanks,
Preston.