Support » Tools » Problem
REPLACEMENT MERCURY FLUID
Hi, I have a chance to purchase a Motion Pro carb synch tool. The problem is that is does not have any mercury in it. I see you have a replacemnt fluid but you say it wont work on older synchronizers. Here is some info taken from the tool. It has a date code of 9838 , on the back it says PCCC no5-10 usa. On the front it says Motion Pro and the scale goes up to 50CM . Will your replacement fluid work on this ? Thanks, Mike
1
I have this problem too
This problem has been solved.
Hello Mike-
The fluid from the SyncPro will not work in mercury based carb tuners, and vice versa. You would need to refill your mercury based carb tuner with mercury only. Since mercury was banned in California and many other states a few years back, we cannot supply a refill.
If you are not in a state where mercury is banned please contact Race Pro Distributing for assistance in obtaining a replacement: compmotors@gmail.com or 503/320-2475
Thank you for your inquiry~
The fluid from the SyncPro will not work in mercury based carb tuners, and vice versa. You would need to refill your mercury based carb tuner with mercury only. Since mercury was banned in California and many other states a few years back, we cannot supply a refill.
If you are not in a state where mercury is banned please contact Race Pro Distributing for assistance in obtaining a replacement: compmotors@gmail.com or 503/320-2475
Thank you for your inquiry~
