Support » Cables » Question
Throttle conversion xr 750
can you make a 2 into 1 throttle cable for an xr750, I currently use the stock system which is two cables with a dual pull throttle, since I use this to hill climb I want to go to a quick pull throttle,Pro hill climber Paul kops uses a 2 into 1 set up that you make for his xr, I don't know what size carbs he uses, but I run 38mm flatslides
1
I have this question too
The best answers
Preston L
replied three years ago
Hello,
I am confident that we can help you out with your request; we did make Paul Kops throttle cable what he had to do was send in his throttle cable as a sample because we do not have information on this application so I will need you to do the same as well as let me know what throttle assembly you are wanting to use, you can view our throttles by clicking the link provided http://www.motionpro.com/motorcycle/tools/category/throttles_and_throttle_sleeves/ and I will need to know what make your carb is, is this a mikuni?
The cost to custom build this cable will be $43 excluding shipping.
We currently have a window of 7 to 8 working days (Monday through Friday) to build the cables once we process the order plus the time of shipping. We do require the order to be paid by credit card and the ship to address is the same as the billing address for the credit card. All of our orders are considered special orders with a no return policy, unless there is a warranty concern of some kind.
In some cases with sample cables sent in we may not have the correct fittings to duplicate the cable exactly and in the case of something like that we will call and let you know what alternatives, if any, there are. If you would like to send the cable in to be duplicated, you’ll want to include a brief note with some contact information in the package and ship it to:
Motion Pro Inc. Attn: Custom Cables
867 American Street
San Carlos, Ca 94070
If you have any questions feel free to contact me with the information provided below.
Thanks,
Preston.
I am confident that we can help you out with your request; we did make Paul Kops throttle cable what he had to do was send in his throttle cable as a sample because we do not have information on this application so I will need you to do the same as well as let me know what throttle assembly you are wanting to use, you can view our throttles by clicking the link provided http://www.motionpro.com/motorcycle/tools/category/throttles_and_throttle_sleeves/ and I will need to know what make your carb is, is this a mikuni?
The cost to custom build this cable will be $43 excluding shipping.
We currently have a window of 7 to 8 working days (Monday through Friday) to build the cables once we process the order plus the time of shipping. We do require the order to be paid by credit card and the ship to address is the same as the billing address for the credit card. All of our orders are considered special orders with a no return policy, unless there is a warranty concern of some kind.
In some cases with sample cables sent in we may not have the correct fittings to duplicate the cable exactly and in the case of something like that we will call and let you know what alternatives, if any, there are. If you would like to send the cable in to be duplicated, you’ll want to include a brief note with some contact information in the package and ship it to:
Motion Pro Inc. Attn: Custom Cables
867 American Street
San Carlos, Ca 94070
If you have any questions feel free to contact me with the information provided below.
Thanks,
Preston.