Support » Tools » Question
Will your pushrod clip tool work with Zippers covers?
1
I have this question too
This question has been answered.
Hello Dennis-
Unfortunately we're unable to verify if our tool will work with your Zippers aftermarket pushrod tubes because we don't have access to dimensional information for that product. However, with a bit of detective work on your end, you should be able to determine if this tool will work for you. The inside diameter of the 08-0255 is 28mm (1.1”) so if the outside diameter of your pushrod tubes is smaller than this the tool should function properly.
I hope this information helps. Please feel free to contact us again if you need further assistance.
Thank you for your inquiry~
Unfortunately we're unable to verify if our tool will work with your Zippers aftermarket pushrod tubes because we don't have access to dimensional information for that product. However, with a bit of detective work on your end, you should be able to determine if this tool will work for you. The inside diameter of the 08-0255 is 28mm (1.1”) so if the outside diameter of your pushrod tubes is smaller than this the tool should function properly.
I hope this information helps. Please feel free to contact us again if you need further assistance.
Thank you for your inquiry~
