• Designed to make rebuilding suspension simple and quick
• Hold shocks and forks vertically while you change oil, re-valve, or change seals
• Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system
• Vise holds 39mm to 69mm diameter parts
• Vise insert set holds 14mm to 39mm diameter parts
• Steel Frame with adjustable pegs is designed to hold clean parts for reassembly

• Soft Jaws Fork Peg holds fork slider up for removal of dust seal and seal retaining clip
• Bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements
• Can be used to assist in removing compression valve assembly (use of stock front axle required)

• Holds shock firmly around shock body or shock reservoir
• Removable aluminum oil catch pan mounts close to the shock to eliminate oil spills/messes
• Vise insert set will allow you to hold various shock shaft sizes to re-valve the shock
• Facilitates removal of piston rod and seal head
• Facilitates removal of shock reservoir caps, chamber pistons or bladder
• Holds shock to remove spherical bearings or needle bearings
• Holds shocks for removal of shock spring

$349.90 $426.50

Part # 08-0391

Motion Pro Soft Jaw Vertical Suspension Vise

Customer Reviews