• Reduces stud installation time by half or more when used in conjunction with the 08-0430 Track Cutting Tool
• No more blisters caused by pushing the stud through the track by hand
• Works with studs with a head diameter up to 1 in. (32 mm) and length up to 1 7/8 in. (47 mm)
• Can reach 8 in. (210 mm) from the edge of the track (a bit more than half way across a standard track)
• Sturdy zinc plated steel construction will provide years of service
• Joe Bolger Designs

$86.99

Part # 08-0431

Snowmobile Stud Installation Tool

Customer Reviews