Products

Articles

Show Filters

Catalog


Fits front wheel



+2.5 in. Housing is longer than OEM cable to allow for after-market cla ... more

+2.5 in. Housing is longer than OEM cable to allow for after-market clamps, bars, dampers, etc.


+1.5 in.


+2.5 in. Housing is longer than OEM cable to allow for after-market cla ... more

+2.5 in. Housing is longer than OEM cable to allow for after-market clamps, bars, dampers, etc


+2 in. Housing is longer than OEM cable to allow for after-market clamp ... more

+2 in. Housing is longer than OEM cable to allow for after-market clamps, bars, dampers, etc.

Rev2/Rev3 cables can only be used with stock throttle body (or carburet ... more

Rev2/Rev3 cables can only be used with stock throttle body (or carburetor where applicable) and Rev2/Rev3 throttle.

Fits rear spoke nipples (6.5mm)


Fits front spoke nipples (6mm)


Damping Rod Holder

$19.99
08-0760


Fits front spoke nipples (6mm)


Fits rear spoke nipples (6.5mm)






Front Wheel hex 19mm. Any damage to axle may not allow tool to fit. Ins ... more

Front Wheel hex 19mm. Any damage to axle may not allow tool to fit. Inspect axle and use a file to remove any rough edges caused by impacts or installation.

Polished aluminum finish. We recommend careful inspection of the pivot ... more

Polished aluminum finish. We recommend careful inspection of the pivot bolt when replacing a lever and that you replace the pivot bolt and lock nut if there are any signs of wear or if the prior lever suffered any impact damage. We also recommend that you replace the lock nut anytime the lever is removed. Pivot bolt and lock nut must be installed and tightened properly as recommended by the manufacturer of your motorcycle. Please remember to lubricate the pivot bolt per the factory service manual recommendations

Polished aluminum finish. We recommend careful inspection of the pivot ... more

Polished aluminum finish. We recommend careful inspection of the pivot bolt when replacing a lever and that you replace the pivot bolt and lock nut if there are any signs of wear or if the prior lever suffered any impact damage. We also recommend that you replace the lock nut anytime the lever is removed. Pivot bolt and lock nut must be installed and tightened properly as recommended by the manufacturer of your motorcycle. Please remember to lubricate the pivot bolt per the factory service manual recommendations

Lever, OE Style, Brake

$12.99
14-0218

Polished aluminum finish. We recommend careful inspection of the pivot ... more

Polished aluminum finish. We recommend careful inspection of the pivot bolt when replacing a lever and that you replace the pivot bolt and lock nut if there are any signs of wear or if the prior lever suffered any impact damage. We also recommend that you replace the lock nut anytime the lever is removed. Pivot bolt and lock nut must be installed and tightened properly as recommended by the manufacturer of your motorcycle. Please remember to lubricate the pivot bolt per the factory service manual recommendations

We use cookies to offer you a better experience and analyze site traffic. By continuing to use this website, you consent to the use of cookies in accordance with our cookie policy.

Stay Tuned

New Products • How-Tos • Racing Videos

No thanks