INNOVATIVE TOOLS AND PRODUCTS THAT HELP YOU MAINTAIN AND REPAIR MOTORCYCLES, ATVS AND UTVS
Maintaining your motorcycle is an important job. Not only so that your bike will live a long life, but also so that it works at its optimum.
VIEW TECH TIP
Motion Pro shows you time saving tips and tools to change your tire.
If your motorcycle or ATV is water cooled, you know how important it is to make sure you have enough coolant in your bike. But did you know that just checking the reservoir on occasion is not all that it takes?
A Simple Solution Without Breaking The Bank
Our Clutch Adjuster Nut Tool for H-D® is compact and easy to use for quickly making clutch adjustments. It's designed to be used with a 11/16" combination wrench and the hollow center allows for a hex wrench to be used to hold the clutch adjuster screw.
on orders of $59.99 or more
Continental US Shipping Only
How the Rev2™ Throttle Works
The Rev2™ throttle has several different size reels that will change how much twist is necessary for the throttle to completely open the carbs or throttle bodies on a motorcycle. The larger the reel is, the shorter the twist. Each reel size will shorten the twist by about 10 degrees. If your stock throttle has a 40mm reel and stock twist is 90 degrees (1/4 turn), the 45mm reel will reduce the twist to 80 degrees and the 50mm reel will reduce it to 70 degrees. The 35mm reel will increase the throttle twist to approximately 100 degrees. This is just an example; every model of motorcycle is different. The included cam reel has a progressive profile that allows the throttle to act like a sensitive, long twist throttle during the initial small throttle openings for precise control and then acts like a more aggressive short twist throttle at large throttle openings, progressively shortening the amount of twist needed to reach full throttle.
New Products • How-Tos • Racing Videos