- Made from steel, lead free
- Adhesive backed steel wheel weights
- Black powder coat finish
- 72 pcs of 1/4oz (7g) weights
- Six strips per box / 12 segments per strip
- Adhesive will work on spoked or cast wheels
- 20.4mm x 13.1mm, horizontal orientation
Part No. 08-0455
orders of $59.99 or more ship for free
This item is unavailable.
Out of stock at Motion Pro
Check with your favorite store or distributor
Accessories and Related Items
Important Installation Instructions - Please read before installing
When applying wheel weights to a wheel, the wheel must be clean, dry, free of solvents and oils and at a minimum temperature. Motion Pro recommends using a water based cleaner like Formula 409 to remove grease and dirt, and then wipe down the wheel with Isopropyl Alcohol to make sure of a clean and dry surface for application of the wheel weights. Minimum temperature for application of wheel weights should be at least 60 degrees Fahrenheit. Some solvents and contact cleaners may leave a residue behind that will prevent proper adhesion of the wheel weights. Removal of old adhesive can be easily accomplished with a citrus based solvent, do not use products like WD40 to remove the old adhesive, as it will leave a significant oily residue behind that will prevent proper adhesion. Temperatures below 60 degrees F will not allow proper adhesion of the wheel weights, and keep in mind that any solvents used will evaporate slower at lower temperatures, so allow more time at low temps when cleaning wheels.
Write a review