Products

Articles

Show Filters

Catalog


Rev2/Rev3 cables can only be used with stock throttle body (or carburet ... more

Rev2/Rev3 cables can only be used with stock throttle body (or carburetor where applicable) and Rev2/Rev3 throttle.



Lever, OE Style, Brake

$49.99
14-0549

We recommend careful inspection of the pivot bolt when replacing a leve ... more

We recommend careful inspection of the pivot bolt when replacing a lever and that you replace the pivot bolt and lock nut if there are any signs of wear or if the prior lever suffered any impact damage. We also recommend that you replace the lock nut anytime the lever is removed. Pivot bolt and lock nut must be installed and tightened properly as recommended by the manufacturer of your motorcycle. Please remember to lubricate the pivot bolt per the factory service manual recommendations. We recommend careful inspection of the pivot bolt when replacing a lever and that you replace the pivot bolt and lock nut if there are any signs of wear or if the prior lever suffered any impact damage. We also recommend that you replace the lock nut anytime the lever is removed. Pivot bolt and lock nut must be installed and tightened properly as recommended by the manufacturer of your motorcycle. Please remember to lubricate the pivot bolt per the factory service manual recommendations.

Lever, OE Style, Clutch

$11.99
14-0523

We recommend careful inspection of the pivot bolt when replacing a leve ... more

We recommend careful inspection of the pivot bolt when replacing a lever and that you replace the pivot bolt and lock nut if there are any signs of wear or if the prior lever suffered any impact damage. We also recommend that you replace the lock nut anytime the lever is removed. Pivot bolt and lock nut must be installed and tightened properly as recommended by the manufacturer of your motorcycle. Please remember to lubricate the pivot bolt per the factory service manual recommendations.

Stock reel is 36.6 mm. Rev3 Kits have cables specifically designed for ... more

Stock reel is 36.6 mm. Rev3 Kits have cables specifically designed for fitment on specific models, but the Rev3 throttle itself is not model specific. Therefore, in some situations, the Rev3 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev3 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev3 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death.


For use on Swingarm spanner nut installation and removal.


Fits stock throttle housing


We use cookies to offer you a better experience and analyze site traffic. By continuing to use this website, you consent to the use of cookies in accordance with our cookie policy.

Stay Tuned

New Products • How-Tos • Racing Videos

No thanks