Products

Articles

Show Filters

Catalog

Lever, OE Style, Clutch

Lever, OE Style, Clutch

$8.99

We recommend careful inspection of the ... more

We recommend careful inspection of the pivot bolt when replacing a lever and that you replace the pivot bolt and lock nut if there are any signs of wear or if the prior lever suffered any impact damage. We also recommend that you replace the lock nut anytime the lever is removed. Pivot bolt and lock nut must be installed and tightened properly as recommended by the manufacturer of your motorcycle. Please remember to lubricate the pivot bolt per the factory service manual recommendations.

Micro Bleeder™, M5x0.8, Gold, for Showa Forks

Micro Bleeder™, M5x0.8, Gold, for Showa Forks

$14.99

Replaces M5x.8 OEM bleeder screw

Mini Bleeder, 8mm

Mini Bleeder, 8mm

$28.99

For servicing rear brake caliper hydrau ... more

For servicing rear brake caliper hydraulic fluid. For servicing front brake caliper hydraulic fluid.

Motion Pro DirtControl™ V2 Lock-On Grips, Black

Motion Pro DirtControl™ V2 Lock-On Grips, Black

$24.99

Use Cam B to stock throttle housing. In ... more

Use Cam B to stock throttle housing. Included with our V2 Lock-On grips.

Motion Pro DirtControl™ V2 Lock-On Grips, Gray

Motion Pro DirtControl™ V2 Lock-On Grips, Gray

$24.99

Use Cam B to stock throttle housing. In ... more

Use Cam B to stock throttle housing. Included with our V2 Lock-On grips.

Pedal Anchor Kit

Pedal Anchor Kit

$8.99

Prevents brake pedal from catching on b ... more

Prevents brake pedal from catching on berms, branches, rocks, etc. Includes 3 cables, 3 special crimp fittings and 12 in. of 1/8 in. clear PVC Made in the U.S.A.

Perch Assembly with Hot Start Lever, OEM Style, Clutch

Perch Assembly with Hot Start Lever, OEM Style, Clutch

$40.99

We recommend careful inspection of the ... more

We recommend careful inspection of the pivot bolt when replacing a lever and that you replace the pivot bolt and lock nut if there are any signs of wear or if the prior lever suffered any impact damage. We also recommend that you replace the lock nut, if applicable, anytime the lever is removed. Pivot bolt and lock nut must be installed and tightened properly as recommended by the manufacturer of your motorcycle. Please remember to lubricate the pivot bolt per the factory service manual recommendations.

Pro Spark Plug Socket™ - 16mm

Pro Spark Plug Socket™ - 16mm

$28.99

May require 3 inch (75 mm) 1/4" drive ... more

May require 3 inch (75 mm) 1/4" drive to 3/8" drive socket extension 08-0655. Sold separately.

Rev3 Throttle Kit, with DirtControl II Grips, Off-Road

Rev3 Throttle Kit, with DirtControl II Grips, Off-Road

$159.99

Off road Rev3 throttle kits require a m ... more

Off road Rev3 throttle kits require a minimum of 200 mm of handlebar length in order to provide sufficient clearance between Rev3 throttle housing and hydraulic brake lever.

Rim lock, aluminum, 1.60/1.40

Rim lock, aluminum, 1.60/1.40

$9.89

Fits front wheel

Rim lock, aluminum, 1.85

Rim lock, aluminum, 1.85

$10.25

Fits rear wheel

Rim Lock, LiteLoc™ II, 1.60"

Rim Lock, LiteLoc™ II, 1.60"

$15.99

Fits front wheel

Rim Lock, LiteLoc™ II, 1.85"

Rim Lock, LiteLoc™ II, 1.85"

$16.99

Fits rear wheel

Ringer® Fork Seal Driver, 46mm/47mm

Ringer® Fork Seal Driver, 46mm/47mm

$52.99

Superlight T6 Hex Axle Tool 17,19,22,24 mm

Superlight T6 Hex Axle Tool 17,19,22,24 mm

$27.99

Front Wheel hex 19mm. Any damage to axl ... more

Front Wheel hex 19mm. Any damage to axle may not allow tool to fit. Inspect axle and use a file to remove any rough edges caused by impacts or installation.

T6 Combo Lever 10/12mm

T6 Combo Lever 10/12mm

$39.99

Tire lever with 10 and 12 mm wrench to ... more

Tire lever with 10 and 12 mm wrench to remove front and rear rim lock nuts. Forged 7075 T-6 aluminum.

T6 Combo Lever 22 mm

T6 Combo Lever 22 mm

$39.99

Tire lever with 22mm wrench to remove f ... more

Tire lever with 22mm wrench to remove front axle nut. Forged 7075 T-6 aluminum.

T6 Combo Lever 32 mm

T6 Combo Lever 32 mm

$39.99

Tire lever with 32 mm wrench to remove ... more

Tire lever with 32 mm wrench to remove rear axle nut. Forged 7075 T-6 aluminum.

T6 Combo Lever Set, 32 mm & 10/12 mm

T6 Combo Lever Set, 32 mm & 10/12 mm

$68.99

T6 Tire lever set comes with a 32 mm wr ... more

T6 Tire lever set comes with a 32 mm wrench to remove rear axle nuts plus a T6 tire lever with a 10/12 mm wrench for removing and installing rim lock nuts. Forged 7075 T-6 aluminum.

Throttle tube, for Honda

Throttle tube, for Honda

$6.50

Fits stock throttle housing

Titan Throttle Tube™, Honda

Titan Throttle Tube™, Honda

$21.99

Fits stock throttle housing. Use with ... more

Fits stock throttle housing. Use with accessory bar end mounted hand-guards requires drilling out end cap, which will void warranty. Can be used with open end MX hand guards without any modification.

Valve Stem Seal Install Tool 5.0mm

Valve Stem Seal Install Tool 5.0mm

$15.99

For installing valve stem seals on inta ... more

For installing valve stem seals on intake and exhaust valve guides

We use cookies to offer you a better experience and analyze site traffic. By continuing to use this website, you consent to the use of cookies in accordance with our cookie policy.

Stay Tuned

New Products • How-Tos • Racing Videos

No thanks