Catalog

We recommend careful inspection of the pivot bolt when replacing a lever and that you replace the pivot bolt and lock nut if there are any signs of wear or if the prior lever suffered any impact damage. We also recommend that you replace the lock nut anytime the lever is removed. Pivot bolt and lock nut must be installed and tightened properly as recommended by the manufacturer of your motorcycle. Please remember to lubricate the pivot bolt per the factory service manual recommendations.

For servicing front brake caliper hydraulic fluid. NOTE: Kawasaki updated the bleeder screw from 10 mm to 8 mm on some models. Physically check your caliper bleeder screw to determine if it is 8 mm or 10 mm hex bleeder screw. If the bleeder screw is 8 mm, purchase part number 08-0482 8 mm mini bleeder. For servicing rear brake caliper hydraulic fluid. NOTE: Kawasaki updated the bleeder screw from 10 mm to 8 mm on some models. Physically check your caliper bleeder screw to determine if it is 8 mm or 10 mm hex bleeder screw. If the bleeder screw is 8 mm, purchase part number 08-0482 8 mm mini bleeder.

Tire lever with 24mm wrench to remove rear axle nut. Forged 7075 T-6 aluminum.